If your uPVC door locks one day and won’t the next, the gearbox inside it is usually on its way out. In Hythe this month a front door gearbox had failed inside: first on and off, then not at all. I fitted the original maker’s part and set the door up so the new one isn’t fighting the same friction.
The job in short
A customer I’ve helped before rang about her uPVC front door in Hythe. It had been locking, then not locking, and then it wouldn’t work at all. The multipoint gearbox had failed inside. I replaced it with a genuine part from the original maker, cleaned and reset the worn keep, and adjusted the hinges and keeps so the door runs smoothly.
- Where
- Hythe, SO45
- What I did
- New genuine multipoint gearbox, keep cleaned and reset, hinges and keeps adjusted
- Result
- Locking and unlocking smoothly, and she’s recommended me to her daughter
- Prices
- Gearbox replacement from £185, no call-out fee, parts guaranteed for 12 months
This is a real job from this month, written up with the customer’s say-so and without her name. A gearbox that’s going is a fault I see a lot, and most people don’t know what’s happening until the door won’t open. If yours is starting to play up, this is what’s going on inside it and what to do.
Why does my uPVC door lock sometimes and not other times?
Usually because the gearbox is failing. The gearbox is the part in the middle of the door’s edge, behind the handle and the key. When you lift the handle and turn the key, it drives the long locking strip that throws the hooks, rollers and bolts up and down the door. Inside it are small moving parts. When they start to wear or break, the lock works one day and not the next. Then one day it doesn’t work at all.
That’s how this one went. It was intermittent at first, locking then not locking, and by the time I got there it had failed inside and wouldn’t operate at all. It’s a fault I see a lot on that make of mechanism.

Signs your uPVC door gearbox is failing
Catch it early and it’s a planned job on a day that suits you. Leave it and it’s often a lockout, or a door that won’t lock at bedtime. Look out for:
- It works some days and not others. The classic sign, and the one this customer had.
- The handle feels floppy, drops without springing back, or lifts with no resistance.
- The key turns but nothing happens, or you have to turn it more than once.
- You have to lift the handle much harder than you used to before the key will turn.
- Clicking or grinding from inside the door when you use the handle.
- The hooks or bolts don’t come out fully when you lift the handle with the door open.
If you’ve got any of those, stop forcing it and ring someone. Forcing a failing gearbox can lock the door shut, and then it’s a bigger job to get it open. If that happens, I’m an emergency locksmith as well, and I’ll try getting you in without damage first. If you’re stood outside right now, read what to do the moment you realise you’re locked out.
What makes a uPVC gearbox fail?
Mostly friction. A door only has to be out by about a millimetre and the hooks and bolts start rubbing on their keeps. Every time you lift the handle, the gearbox has to fight that friction. Do that a few times a day for a few years and the small parts inside give up.
Doors move for all sorts of reasons. Hinges wear and the door drops a little. The frame and the wall round it move with the seasons. Building work shifts things. There’s more on a uPVC door dropped on its hinges and whether a locksmith can fix a dropped door. French doors suffer the same way: here are French doors that were hard to lock in St Denys.
Should I fit a genuine gearbox or a cheaper copy?
Genuine, every time. That’s my rule. I fitted a genuine part from the original maker on this door, and I always do where I can get one. In my experience the copy versions don’t last, and they don’t run as smoothly as the original was designed to. There’s an old saying: buy cheap, buy twice. With gearboxes it’s true. And every part I fit comes with a 12-month guarantee from me.
Getting the right one matters too. Gearboxes come in different sizes and layouts, and the replacement has to match the old one. If it’s the wrong size, it won’t line up with the handle and the key, and you’re back to friction again.

Sometimes it’s not just the gearbox. If the whole locking strip is worn, the job becomes a multipoint lock strip replacement. I’ll tell you which it is before I order anything. My door mechanism repair page covers the rest of what can go wrong inside a door, and if you’re choosing a new door, here’s what goes wrong with composite and uPVC doors.
Genuine gearbox or copy: the difference
| Genuine original-maker part | Copy or universal part | |
|---|---|---|
| Fit | Made to match the original lock | Close enough is not always close enough |
| How it runs | As smooth as the door was designed to be | In my experience, often not as smooth |
| How long it lasts | Built for the job it’s doing | In my experience, they don’t last |
| Cost over time | Pay once | Buy cheap, buy twice |
Why adjust the hinges and keeps after fitting a new gearbox?
Because if you don’t, the new gearbox fights the same friction that broke the old one. Fitting it is only half the job.
On this door the keep was loose and worn, so I gave it a proper clean and reset it so it’s secure and the hooks drop in cleanly. Then I adjusted both the hinges and the keeps, because the door and the structure round it can move at different angles. By the time I’d finished, the door was opening, closing and locking smoothly with an easy lift of the handle.


That hinge is a good example of what I find. Dirt and cobwebs build up round the adjuster, and nobody looks at it until the door has dropped and the lock starts to fight back.
How much does a uPVC gearbox replacement cost?
My gearbox replacement starts from £185, with no call-out fee. “From” is where the price starts. An unusual size, a part that has to be ordered in, or a door that’s locked shut can all put it up. If it’s going to cost more, I tell you before I start and we agree it, never after. Parts are guaranteed for 12 months. A door realignment on its own starts from £85. All my prices are on the prices page.
Any trader fixing your door should do it with reasonable care and skill. Citizens Advice explains what that means and what to do if a job isn’t right: problem with building work or home improvements.
How do I look after a multipoint lock so the gearbox lasts?
- Lubricate it. GT85 or a silicone-based spray on the hooks, rollers and bolts down the door edge. No oil at all: not 3-in-1, not WD-40. At least every six months, every three months is better.
- Lift the handle gently, all the way, then turn the key. Never use the key to force the hooks home.
- Keep the keeps clean. Wipe out the dirt and grit from the plates on the frame.
- Check the hinges for dirt round the adjusters, and watch for a door that’s started to drop or rub.
- Get a second pair of eyes. My free home security check covers every lock in the house.
- Act on the first sign. A door that needs a shove today can be a gearbox that fails soon.
Not sure if yours is going? WhatsApp me a short video of you lifting the handle and turning the key, and I’ll tell you what it probably is.
Who did the work?
Me. I’m Donald Edwards, Bugsy to everyone, and KeyWise 24hr Locksmiths is my own business. I’m a mobile locksmith based on the Waterside, a uPVC door and lock specialist, I hold the NCFE Advanced Certificate in Locksmithing at Level 4, and I’m DBS checked. You can read more about me here.
Frequently asked questions
How do I know if my uPVC door gearbox is broken?
The usual signs are a lock that works some days and not others, a floppy handle, a key that turns without moving the locks, or grinding from inside the door. If the hooks don’t come out when you lift the handle with the door open, the gearbox is very likely gone.
Can I still use my door if the gearbox is failing?
Carefully, but get it looked at soon. If it locks shut while failing, it’s harder to open and the job gets bigger.
Is a genuine gearbox worth the extra?
In my experience, yes. Copies don’t tend to last or run as smoothly. Buy cheap, buy twice.
Why did my gearbox break?
Usually friction. A door out by about a millimetre makes the gearbox fight the keeps every time you lift the handle, and in the end the parts inside give up.
Is there a guarantee on a new gearbox?
Yes. Every part I fit is guaranteed for 12 months.
Will you adjust the door after fitting a new gearbox?
Always. I check and adjust the hinges and keeps so the new gearbox isn’t fighting the same friction that broke the old one.
Do you cover Hythe?
Yes, Hythe is home ground. See my Hythe locksmith page, or my guide to securing a Hythe home. I also wrote up a jammed door in Dibden Purlieu where it was the gearbox.
One last thing.
This customer had me out before, and she’s recommended me to her daughter. That’s how most of my work comes in, and it’s why I’d rather fit the right part and set the door up properly than rush it. Tonight, open your back door, lift the handle and turn the key. If it’s harder than it should be, ring me before it fails.
Ring or WhatsApp me on 07453 327708. If it’s not something I can help with, I’ll point you to someone honest who can.
Bugsy, KeyWise 24hr Locksmiths, Hythe, Southampton.
Be wise, phone Keywise.





